CORBIN 2008 PRICE LIST (All Prices in US Dollars) Prices subject to change without notice: currently pending orders are protected against price increases. * FPH-1-S --------- Extra floating punch holder ------------------ 49.00 * STOPPIN1 -------- Stop pin, spare (specify CSP-3 press) --------- 7.50 * CSP-1A ---------- Anvil set (solid ram and head) --------------- 69.50 Type -M dies: (For discontinued Silver Press, replacements.) * CSW-1-M -------- Core Swage Die and Punch ----------------------179.00 * CS-1-M --------- Core Seating Die and Punch. -------------------179.00 * PF-1-M --------- Point Forming Die and Punch ------------------ 229.00 * PF-1-MC -------- Custom (non-stock) PF die set ---------------- 449.00 * LT-1-M --------- Lead Tip Forming Die and Punch ----------------179.00 * RBT-2-M -------- Rebated Boattail Add-on Set ------------------ 458.00 * * LSWC-1-M ------- Lead SWC (any base shape) ---------------------179.00 * JSWC-2-M ------- Jacketed or lead SWC ------------------------- 358.00 * FJFB-3-M ------- Flat base open tip --------------------------- 587.00 * LTFB-4-M ------- Flat base lead tip or open tip --------------- 766.00 * RBTO-4-M ------- RBT open tip --------------------------------- 866.00 * RBTL-5-M ------- RBT, lead tip or open tip ------------------- 1045.00 * FRBO-5-M ------- RBT or flat base, open tip ------------------ 1045.00 * FRBL-6-M ------- RBT or flat base, lead or open tip ---------- 1224.00 Sub-cals & custom shapes/sizes, add $150 per PF-1 or RBT-2. * DDS-1-M ------- Dual Diameter bullet sizer -------------------- 229.00 * DDS-1-MC ------ Dual Diameter pellet swage w/bleed holes ------ 298.00 * SDD-1-M ------- Jacket serrator die, full length -------------- 249.00 * SDD-2-M ------- Ogive serrator, adjustable length ------------- 298.00 * BGK-1-M ------- Base Guard Maker ------------------------------ 229.00 * JRD-1-M ------- Jacket Reducing Die --------------------------- 179.00 * BRD-1-M ------- Bullet Reducing Die (.006" max) --------------- 179.00 * SPJM-25M ------ 25 ACP shotgun primer jacket maker ------------ 179.00 * RFJM-24M ------ 6mm Rimfire Case Jacket Maker ----------------- 179.00 * RFJM-22M ------ 224 Rimfire Case Jacket Maker ----------------- 179.00 * RFJM-KO ------- Knock-out rod for jacket-maker ----------------- 6.00 * RFJM-ROD ------ 224 screw-in hardened rod for punch ------------- 6.00 * PUNCH-M ------ Standard Punch for any -M die ------------------ 50.00 * PUNCH-MC ------ Custom punch made to customer specs, min. price 120.00 * EJECT-M ------- Ejection pin wire, replacement, pkg./5 --------- 10.00 S-Press and accessories: * CSP-1 --------- S-PRESS, with punch holder ------------------- 498.00 * CSP-1H -------- Hydro-Mite 120vac Hydraulic press ------------ 3450.00 * CSP-1HC ------- Precision Control Add-on Kit ------------------ 699.00 * CSP-1A ------- Anvil set (ram & head) hard steel faces -------- 69.50 * CSP-1B -------- Bench Stand with storage shelf ----------------- 89.50 * CSP-1C ------- Clip assembly, handle retainer ----------------- 19.50 * CSP-1LH ------- Long handle (optional) ------------------------- 79.50 * CSP-1P -------- Ram-to-toggle link pin, standard --------------- 10.00 * CSP-1PC ------- Ram-to-toggle link pin, extra heavy duty ------- 19.50 * CSP-1R -------- Spare Reloading Adapter (for ram) -------------- 49.00 * CSP-S --------- Floor Stand (150 lbs) ------------------------- 398.00 * CSP-1SH ------- Standard handle (replacement, comes w/press)---- 59.50 * CSP-1T -------- Primer catcher tray, steel (spare) ------------- 15.00 * CSP-1H -------- S-Press Head Plate, 7/8-14 thread -------------- 89.00 * CSP-1HC ------- S-Press Head Plate, custom threads ------------ 249.00 * STOPPIN1 ------ Spare Stop Pin (short pin for Series II) -------- 7.50 * STOPPIN2 ------ Spare Stop Pin (long pin for S-Press) ----------- 7.50 * FPH-1HEX ------ Hex-head punch retainer (bushing), spare ------- 10.00 * FPH-1RING ----- Steel insert ring for early external punches ---- 8.00 * FPH-1-S ------- Additional Floating Punch Holder --------------- 49.00 * FPH-S-QC ------ Quick-Change Punch Holder, for long bullets --- 129.00 Type -S dies: Custom shapes and sizes, add $150 per die. All prices include standard punches. Special shapes, add $70 per punch. Calibers .224 to .458 standard price. Calibers less than .224 (down to .120) are custom (PF-1-SC instead of PF-1-S, add $150 per set). * CSW-1-S ------- Core Swage Die and Punch ---------------------- 179.00 * CS-1-S -------- Core Seating Die and Punch. ------------------- 179.00 * PF-1-S -------- Point Form Die and Punch ---------------------- 229.00 * PF-1-SC ------- Custom shape / cal. point form die ------------ 449.00 * LT-1-S -------- Lead Tip Forming Die and Punch ---------------- 179.00 * LT-2-SC ------- Lead Tip Die w/open tip closing punch --------- 229.00 * RBT-2-S ------- Boattail Add-on Set --------------------------- 458.00 * RBT-2-SC ------ Custom Boattail Add-on Set -------------------- 678.00 * LSWC-1-S ------ Lead SWC bullets, std. punches ---------------- 179.00 * LSWC-1SC ------ Custom LSWC (larger diam, special shapes) ----- 298.00 * JSWC-2-S ------ Jacketed or lead SWC bullets ------------------ 358.00 * FJFB-3-S ------ Flat base open tip ---------------------------- 587.00 * LTFB-4-S ------ Flat base lead tip or open tip ---------------- 766.00 * RBTO-4-S ------ Rebated boattail (RBT) open tip --------------- 866.00 * RBTL-5-S ------ RBT lead tip or open tip --------------------- 1045.00 * FRBO-5-S ------ RBT or flat base, open tip ------------------- 1045.00 * FRBL-6-S ------ RBT or flat base, open or lead tip ----------- 1224.00 * DDS-1-S ------- Dual Diameter (bore rider) bullet sizer ------- 249.00 * DDS-1-SC ------ Combo DDS and LSWC, (pellet swage) ------------ 298.00 * SDD-1-S ------- Jacket serrator, full length ------------------ 249.00 * SDD-2-S ------- Ogive serrator, adjustable length ------------- 298.00 * CTJM-1-S ------ Tubing Jacket-maker, Corbin tubing ------------ 498.00 * CTJM-2-S ------ Jacket maker for client-supplied tubing ------- 898.00 * BGK-1-S ------- Base Guard kit, use .03 copper strip --------- 229.00 * JRD-1-S ------- Jacket Drawing Die (reduce diam. only) -------- 179.00 * JRD-2-S ------- Jacket Drawing Die, commercial, diam/wall ----- 298.00 * BRD-1-S ------- Bullet Reducing Die (.006" max), flat base ---- 179.00 * BRD-1-SC ------ Bullet Reducing Die w/BT support punch -------- 219.00 * ET-2-S -------- Auto-ejecting, fast jacket trimmer ------------ 249.00 * RFJM-22S ------ Rimfire jacket maker, 22LR to 224 ------------- 179.00 * RFJM-24S ------ Rimfire jacket maker, 22LR to 243 ------------- 179.00 * RFJM-KO ------- Knock-out rod for jacket-maker ----------------- 6.00 * RFJM-ROD ------ 224 screw-in hardened rod for punch ------------- 6.00 * DCD-1-S ------- Disk cutter die (metal or fiber) -------------- 198.00 * BSK-1-S ------- Round Ball Swage Set, .22 to .458 ------------- 498.00 * GCM-1-S ------- Gas Check kit, use .03 copper strip ----------- 398.00 * The following jacket maker produces a 1/2-in x .45 pistol jacket: * JMK-1-S ------- Jacket Making Kit, .452 from .30" strip ------- 849.00 * JRD-2-S ------- Jacket Reducer for above, other cals ---------- 298.00 * ET-2-S -------- Trim Die for above, other cals ---------------- 249.00 * Add JRD-2-S and ET-2-S for .44, .41, .40 cal (direct from .452) * Add JRD-2-S and ET-2-S for 9.3mm, .38, 9mm (step from .40 or .41) * Add JRD-2-S and ET-2-S for 8mm, .30, 7mm, .270 (step from above) * Add JRD-2-S and ET-2-S for 6.5, .25, .243, .224 (step from above) * Add JRD-2-S and ET-2-S for .20, .19, .17 (step from above) * Add JRD-2-S and ET-2-S for .14, .12, .10 (step from .17) * FX-1-S -------- Bullet reform/repair kit .224-.458 ------------ 498.00 * FX-1-SC ------- As above, for calibers .120-.220 -------------- 598.00 * FX-2-S -------- Boattail spitzer forming set ------------------ 998.00 * PUNCH-S ------- Punch for any -S die (stock shapes) ------------ 50.00 * PUNCH-SC ------ Custom shapes made to order (within limits)---- 120.00 * PUNCH-SA ------ Adjustable length punch, .375 and under ------- 149.00 * PUNCH-SL ------ Large diam. adj. punch, over .375 caliber ----- 229.00 * PUNCH-SX ------ Cruciform X-punch, core seat external --------- 120.00 * PUNCH-SS ------ Saber Tooth, core seat internal --------------- 120.00 * EJECT-S ------- Ejection pin wire replacement, pkg/5 ----------- 10.00 * FUNNEL-S ------ Powder Metal Precision Funnel w/insert -------- 198.00 * PUNCH-SF ------ Extra long powder metal core seat punch ------- 120.00 * Combination of above -------------------------- 318.00 * FUNNEL-I ------ Powder Metal Spout Insert (specify jacket) ----- 75.00 Mega-Mite Hand Press for -H dies: * CSP-2 --------- Mega-Mite Press without floor stand ----------- 798.00 * CSP-S --------- Floor stand for CSP-1 or CSP-2 ---------------- 349.00 * CSP-2S -------- Mega-Mite Press with floor stand ------------- 1088.00 * CSP-2KO ------- Set of four KO bars for CSP-2 press ------------ 40.00 * CSP-2RP ------- Ram to toggle pin, replacement ----------------- 10.00 * CSP-2R -------- Punch retraction pin, 1/4-inch diam.------------- 5.00 * CSP-2LH ------- Long handle, high torque handle option --------- 98.00 * CSP-2SH ------- Short handle, roller side-bar style ------------ 98.00 * CSP-2C -------- Handle retaining clip assembly, holds handle --- 19.50 * CHP-EXT ------- Rod extender kit, adds 3 inches to CSP-2 ------- 90.00 Note: Mega-Mite presses shipping after Sept 2003 come standard with CSP-2SH which is offered as an option for owners of earlier models. Currently shipping presses come with free handle retainer assembly. Cabinet Model Hydraulic/Electric Presses and Dies: * CHP-1 --------- CORBIN HYDRO-PRESS, 115v 60 Hz. -------------- 6950.00 * CSP-2H -------- Hydro, Jr., 120vac 60Hz --------------------- 4950.00 Options: * A-220V -------- 240v 50 Hz. export power option --------------- 498.00 * Note: Specify 220v 50hz, 220v 60hz, or 208v 50hz. * FPH-2-H ------- Positive Stop Punch Holder -------------------- 249.00 * FPH-QC-H ------ Quick Change Punch Holder --------------------- 249.00 * APA-2-H ------- Arbor Press Anvils (set 2) -------------------- 169.00 * PT-50-H ------- Primer Tool, 50 BMG cases includes SH-50-H ---- 198.50 * SH-50 -------- Shell Holder, 50 BMG, hardened, 7/8-14 --------- 69.50 * RLA-1-H ------- Reloading Adapter Kit, (3 parts below) -------- 147.00 * RLA-EX -------- Ram Extension for reloading (1.0-12 to 7/8-14) - 49.00 * RLA-B --------- Bushing, 1.5-12 to 7/8-14 (head) --------------- 49.00 * RLA-A --------- Shell Holder Adapter (RCBS to 7/8-14) ---------- 49.00 * CHP-B2 -------- Heavy duty bushing, 1.5-12 to 1.25-12 --------- 129.00 * CHP-S2H ------- Type-S (5/8-24) punch to CHP ram adapter ------- 49.00 * FPH-S2H ------- Adapter for FPH-1-H to hold 5/8-24 punch ------- 49.00 * ET-2KIT ------- Adapter, use ET-2-S in -H press (above 2 items)- 98.00 * SK-1-H -------- Jacket Stripper Kit, w/one caliber plate ------- 49.00 * SK-P-H -------- Additional caliber of stripper plate ----------- 10.00 * CHP-EXT ------- Extender kit, adds 3 inches to press opening -- 129.00 * Use above for reloading 20mm, etc. Spare Parts for CHP-1 and CSP-2H: * FPH-1-H ------- Floating Punch Holder (spare) ----------------- 129.00 * CHF-128 ------- Corbin Hydraulic Fluid, 128 oz ----------------- 29.00 * CHP-IL1 ------- CHP Indicator assembly (1 of 3) ---------------- 12.00 * CHP-IL2 ------- CHP Inspection lamp bulb ------------------------ 3.00 * CHP-RLY ------- CHP Logic relay (1of 6) ------------------------ 29.00 * CHP-TIME ------ CHP Timer Module (1) -------------------------- 129.00 * CHP-PDX ------- CHP Sensor (1 of 3 proximity detectors) ------- 189.00 * CSP-2HLS -------CSP-2H limit switch (2) ------------------------ 89.50 * CHP-SV -------- Solenoid Value, direction control (1) --------- 289.00 * CHP-OF -------- Oil Filter (1) --------------------------------- 24.00 * CHP-PIN ------- Retraction pin for internal punch --------------- 5.00 * CHP-KO -------- Knock-out bar, hardened ------------------------ 10.00 * CHP-RAM ------- Hardened, ground ram w/instructions ----------- 298.00 * CHP-HP -------- Head Plate, 1.5-12 standard 1-inch thick ------ 150.00 * CHP-HPC ------- Head Plate, w/custom hole size/threads -------- 298.00 TYPE -H Dies: * CSW-1-H ------- Core Swage Die and Punch ---------------------- 229.00 * CS-1-H -------- Core Seating Die and Punch. ------------------- 229.00 * PF-1-H -------- Point Forming Die (standard) ----------------- 298.00 * PF-1-HC ------- Custom Cal./Shape Point Form Die -------------- 519.00 * LT-1-H -------- Lead Tip Forming Die and Punch ---------------- 229.00 * LT-1-HC ------- Lead Tip Forming Die, custom/meplat reducer --- 299.00 * RBT-2-H ------- Rebated Boattail Add-on Set ------------------- 596.00 * RBT-2-HC ------ Custom angle or depth RBT Add-on Set ---------- 896.00 * LSWC-1-H ------ Lead SWC bullets, any base style -------------- 229.00 * LSWC-1HC ------ Custom LSWC (large diam, special shapes) ------ 379.00 * JSWC-2-H ------ Jacketed or lead SWC bullets ------------------ 458.00 * FJFB-3-H ------ Flat base open tip ---------------------------- 756.00 * LTFB-4-H ------ Flat base lead tip or open tip ---------------- 985.00 * RBTO-4-H ------ RBT open tip --------------------------------- 1123.00 * RBTL-5-H ------ RBT open tip or lead tip --------------------- 1352.00 * FRBO-5-H ------ RBT or flat base, open tip ------------------- 1352.00 * FRBL-6-H ------ RBT or flat base, open or lead tip ----------- 1581.00 * PUNCH-H ------- Standard Punch (stock design) ------------------ 50.00 * PUNCH-HC ------ Custom Punch (made to order) min. price ------- 149.00 * PUNCH-HA ------ Adjustable shoulder punch, .375 and smaller --- 179.00 * PUNCH-HL ------ Large diam. adj. punch, over .375 diameter ---- 249.00 * PUNCH-HF ------ Long punch for powder metal funnel ------------ 149.00 * PUNCH-HX ------ Cruciform X-punch, core seat external --------- 149.00 * PUNCH-HS ------ Saber Tooth, core seat internal --------------- 149.00 * EJECT-H ------- Ejection pin replacement wires, pkg./5 --------- 10.00 Draw Dies, Serrators & Extruders * DDS-1-H ------- Dual Diameter bullet sizer -------------------- 329.00 * JRD-1-H ------- Jacket Reducing Die, standard, diam.only ------ 198.00 * JRD-2-H ------- Jacket Reducing Die, production design -------- 349.00 * JRD-2-HS ------ Above die, less 5/8-24 to 1-12 adapter -------- 300.00 * CHP-S2H ------- Adapter, for 5/8-24 punch to 1-12 ram ---------- 49.00 * JRD-2PUN ------ Punch for JRD-2-H, 5/8-24 to fit CSP-S2H ------ 120.00 * BRD-1-H ------- Bullet Reducing Die, flat base ---------------- 198.00 * BRD-1-HB ------ Bullet Reducing Die with RBT punch ------------ 268.00 * BRD-1-HC ------ Bullet Reducing Die with spring guide punch --- 349.00 * SDD-1-H ------- Jacket Serrator Die, full length -------------- 349.00 * SDD-2-H ------- Ogive Serrator Set, adjustable length --------- 598.00 * LED-1-H ------- Lead Wire Extruder Set w/4 inserts ------------ 498.00 * LED-D --------- Lead Wire Extruder Die (specify size) ---------- 25.00 Jacket Maker Kits & Trimmers * CTJM-1-H ------ Tubing Jacket-maker, Corbin tubing ------------ 649.00 * CTJM-2-H ------ Jacket Maker for client-supplied tubing ------ 1049.00 * JMK-1-H ------- Manual-feed Strip Jacket Maker Kit ----------- 3950.00 * JMK-2-H ------- Auto-feed Strip Jacket Maker Kit ------------- 5950.00 * CSU-1 --------- Corbin Strip Uncoiler (100-lb spools) -------- 2450.00 * JMK-2-H & CSU-1, total: --------------------- 8400.00 * JMK-2B-H ------ Blank/Cup die assembly to fit JMK-2-H head --- 1059.00 * JMK-2H-H ------ Auto-feed head assembly, less dies ----------- 3950.00 * JMK-2P-H ------ Head plate assembly, less dies and autofeed--- 1050.00 For additional draws, add JRD-2-H per step, and ET-2-HC trimmers as needed to maintain desired length (intermediate steps should be kept at minimum useful length by trimming). * JMK-2-HC ------ Benchrest design Jacket Maker Kit ------------ 7950.00 * JMK-2BHC ------ Benchrest design Blank/Cup die assembly ------ 1250.00 Benchrest design jacket making system develops world-class jacket wall concentricity through ultra-high precision guidance and support (typical results better than .0001-2 average run-out). System must be used as a complete, integrated package without mixing other draw stages in order to maintain the level of precision. Several calibers can be initially designed into one system (e.g., 308, 284, 264 from one system, or 257, 243, and 224 from one system) without loss of precision. * ET-2-H -------- Auto-ejecting adj. jacket trimmer ------------- 364.00 * ET-2KIT ------- Adapter set, ET-2-S to -H, incl.in above ------ 98.00 * ET-2-HC ------- Jacket trimmer, commercial production --------- 429.00 * BGK-1-H ------- Base guard maker, .03-in. copper -------------- 329.00 * GCM-1-H ------- Gas Check Maker, .03-in X 1-in strip ---------- 498.00 * RFJM-22H ------ Rimfire Jacket Maker, 22LR to 224 ------------- 198.00 * SK-1-H -------- Stripper Kit, for jacket draw dies ------------- 49.50 * SK-P-H -------- Additional caliber of stripper plate ----------- 10.00 Specialty Dies: * FX-1-H -------- Bullet repair/high pressure swage ------------- 698.00 * FX-1-HC ------- Bullet repair kit for subcalibers ------------- 898.00 * FX-2-H -------- Boattail spitzer forming set w/eject punch --- 1498.00 * DCD-1-H ------- Disk Cutter Die, copper disks or wads --------- 329.00 * BSK-1-H ------- Muzzle-loader round ball kit ------------------ 698.00 * FUNNEL-H ------ Powder Metal Funnel with spout ---------------- 198.00 * PUNCH-HF ------ Powder Metal Funnel punch, fits spout --------- 149.00 * Both the above -------------------------------- 347.00 * FUNNEL-I ------ Powder Metal Funnel Insert (spout) ------------ 75.00 * SGS-3-H ------- Helical finned hollow body slug set ---------- 1450.00 Copper Strip, deep-drawing quality for bullet jackets: * CU-5 ---------- Copper strip, 5-lb bundle 1-in X .030 --------- 69.00 * CU-50 --------- Copper strip, 50-lb coil 1-in X .030 ---------- 649.00 * CU-50T -------- Copper strip, 50-lb coil 1.4 x .093 (50 bmg) -- 698.00 Copper Tubing for making high performance jackets: * TU-1/4 -------- .250-in diam X .028 wall, 3-ft. section -------- 7.00 * TU-5/16 ------- .313-in diam X .035 wall, 3-ft. section --------- 8.00 * TU-3/8 -------- .375-in diam X .035 wall, 3-ft. section --------- 9.00 * TU-1/2 -------- .500-in diam X .035 wall, 3-ft. section -------- 11.00 * SAW-1 --------- Tubing cutter saw, 115-vac 60-Hz. 1-3 in.pcs -- 489.50 * SAW-2 --------- Tubing cutter saw, continuous lengths --------- 589.50 * SAW-B --------- Replacement blades, high speed ----------------- 29.50 * SAW-BB -------- Blade bolt (Left hand grade 6 cap screw) ------- 6.00 Base Guards -- No lube w/soft lead bullets, up to 1400 fps: * JBG-30 -------- 30-32 caliber, per 1000 ------------------------ 27.00 * JBG-38 -------- 9mm-358 caliber, per 1000 ---------------------- 29.00 * JBG-40 -------- 40-41 caliber, per 1000 ------------------------ 32.00 * JBG-44 -------- 429-444 caliber, per 1000 ---------------------- 32.00 * JBG-45 -------- 451-458 caliber, per 1000 ---------------------- 32.00 Bullet Jackets (Specs, prices subject to change with availability) * J-17-500 ------ .172 cal X .500 len., per 500 ------------------ 45.00 * J-22-705 ------ .224 cal X .705 len., per 500 (VB)-------------- 45.00 * J-22-BOX ------ .224 cal x .705 len., box of 4500 (VB) -------- 390.00 * J-6M-102 ------ .243 cal X 1.02 len., per 250 (VB)-------------- 32.00 * J-6M-BOX ------ .243 cal x 1.02 len., box of 2500 (VB) -------- 310.00 * J-30-125 ------ .308 cal X 1.25 len., per 250 (VB)-------------- 35.00 * J-30-BOX ------ .308 cal x 1.25 len., box of 1300 (VB) -------- 175.00 * J-38-377 ------ 9mm/38 cal X .377 len., per 500 ---------------- 45.00 * J-38-475 ------ 9mm/38 cal X .475 len., per 500 ---------------- 45.00 * J-38-660 ------ 9mm/38 cal X .660 len., per 250 ---------------- 32.00 * J-40-670 ------ 40 cal X .670 len., per 250 -------------------- 35.00 * J-44-550 ------ 429 cal X .550 len., per 250 ------------------- 32.00 * J-44-700 ------ 429 cal X .700 len., per 250 ------------------- 35.00 * J-45-550 ------ 45 cal X .550 len., per 250 -------------------- 32.00 * J-45-700 ------ 45 cal X .700 len., per 250 -------------------- 35.00 Bullet Balls, Ultra-light cores, tip protectors, balance shifters, accurate weights, priced aprox. 1000 per package by weight: * BB-1/8 -------- White, filler for 17, tips for 22-6mm ---------- 25.00 * BB-3/16 ------- Green, filler in 22-6mm, tips to 284 ----------- 30.00 * BB-1/4 -------- Yellow, filler in 7-8mm, tip for 38-9mm -------- 35.00 * BB-5/16 ------- Blue, filler in 38-9mm, tip for 40-45 ---------- 40.00 * BB-3/8 -------- Red, filler in 40-45 cal, tip for 458-up ------- 45.00 Corbin Publications: * BP-7 ---------- Book Package, 4 print, 3 ebooks ---------------- 69.50 * TB-1 ---------- Corbin Technical Bulletins, Vol. I ------------- 12.50 * TB-2 ---------- Corbin Technical Bulletins, Vol. II ------------ 12.50 * TB-3 ---------- Corbin Technical Bulletins, Vol. III ----------- 12.50 * TB-4 ---------- Power Swaging ---------------------------------- 24.50 * BSM ----------- Bullet Swage Manual, T. Smith ------------------ 12.50 * WD-1 ---------- World Directory of Custom Bullet Makers -------- 24.50 * MIP ----------- Marketing Information Package ------------------- 4.00 Corbin Software for MS-DOS: * DC-NAMER ------ Unlimited product and business namer ----------- 10.00 * DC-CSP -------- Oregon Payroll System ------------------------- 298.00 * DC-CTC -------- Time Clock (employee clock) incl.in above ------ 49.50 * PC-DS --------- Powder Coating Data System --------------------- 49.50 Corbin Software for Windows, instant engineering on Cd-ROM: * DC-DIES ------- Internal pressures, breaking points, hydraulics- 10.00 * DC-LEAD ------- Wire extrusion, core lengths, powder metals----- 10.00 * DC-SALES ------ Bullet pricing calculator, for bullet makers --- 10.00 * DC-TWIST ------ Twist rate calculator, English/Metric converter- 10.00 * DC-1001 ------- Tangential Ogive BC Calculator/designer -------- 25.00 * DC-1003 ------- Paper-patch bullet designer -------------------- 10.00 * DC-1004 ------- Real-time air resistance plotter --------------- 25.00 * DC-1015 ------- Bullet Design Engineer's Pack ------------------ 72.00 * Engineer's Pack consists of DC-1001, DC-1003, DC-1004, DC-TWIST, and * HB-9-E in one package. Corbin Software for Windows, e-books in Adobe Acrobat PDF format: * HB-9-E -------- Handbook of Swaging No.9 text e-book ------------ 9.50 * DC-TIII ------- Turning Ideas Into Income e-book ---------------- 9.50 * WD-1-E -------- World Directory of Custom Bullet Makers, e-book - 9.50 * TB-4-E -------- Power Swaging, e-book --------------------------- 9.50 * WEB-CD -------- Web site, catalog, instructions on CD-ROM ------- 9.50 * DC-JPG-1 ------ Royalty-free bullet photos for your ads (jpg) --- 9.50 * DC-JPG-2 ------ Photos sky, mountains, forrests, animals (jpg) -- 9.50 Sportswear: * CAP-1 --------- Custom Bullet Maker's cap, brushed canvas ------ 15.00 * T-SHIRT1 ------ Custom Bullet Maker's T-Shirt (S,M,L) ---------- 22.00 * T-SHIRT2 ------ Custom Bullet Maker's T-Shirt (XL, XXL)--------- 24.00 * Note: Cap-1, T-Shirt1/2 are five color printed with silver metallic * bullet, and say that the wearer is a custom bullet maker. Chemical Products: * CSL-2 --------- Corbin Swage Lube, 2-oz ----------------------- $ 8.00 * CSL-16 -------- Corbin Swage Lube, 16-oz. ---------------------- 35.00 * CBC-4 --------- Corbin Bore Cleaner, 4-oz. ---------------------- 8.00 * CBC-16 -------- Corbin Bore Cleaner, 16-oz. -------------------- 25.00 * CBC-128 ------- Corbin Bore Cleaner, 128-oz (gallon) ---------- 150.00 * CCB-2 --------- Corbin Core Bond, 2-oz -------------------------- 8.00 * CCB-16 -------- Corbin Core Bond, 16-oz ------------------------ 35.00 * CDL-4 --------- Corbin Dip Lube (Liquid Jacket), 4-oz ----------- 8.00 * CDL-16 -------- Corbin Dip Lube, 16-oz ------------------------- 25.00 * CDL-128 ------- Corbin Dip Lube, gallon ----------------------- 150.00 * CBL-4 --------- Corbin Bore Lap, 4-oz --------------------------- 8.00 * CBL-16 -------- Corbin Bore Lap, 16-oz ------------------------- 25.00 * CCS-16 -------- Corbin Cleaning Solvent, 16-oz ----------------- 25.00 * FSO-16 -------- Corbin Gun Oil (5-Star ISO-10), 16-oz ---------- 25.00 * CHF-128 ------- Hydro-press Hydraulic Fluid, 1-gal. ------------ 25.00 * HTC-1 --------- Heat Treatment Compound, 1-lb ------------------ 45.00 * SL-8 ---------- Silver Lube, high temp mould lubricant --------- 25.00 * MSL-11 -------- Moly Spray Lube, instant dry, for lead bullets - 22.00 * CUP-8 --------- Copper Powder, Atomized, 8 oz. ------------------ 8.00 * CUP-64 -------- Copper Powder, Atomized, 4 lb (64 oz) ---------- 59.50 * CUP-100 ------- Copper Powder, Atomized, 100 lb -------------- 1200.00 * WS-1 ---------- Walnut Shell Polishing Media, 1-lb. ------------- 3.00 * WS-10 --------- Walnut Shell Polishing Media, 10-lb ------------ 27.00 * WS-25 --------- Walnut Shell Polishing Media, 25-lb ------------ 49.00 * BOX-1 --------- Universal Bullet Box w/charcoal foam pads ------- 2.50 * BOX-25 -------- Carton of 25 of the above ---------------------- 59.00 * ST-6 ---------- SIM-TEST(tm) ballistic media, 60lb-carton ----- 159.00 * ST-1 ---------- SIM-TEST(tm) test media, 10lb block (1/6 ctn) -- 39.00 Core-making equipment and supplies: * CM-4 ---------- 4-cavity core mould, std. sizes ------------- $ 149.00 Sizes: .185, .218, .247, .312, .340, .365 diam. * CM-3 ---------- 3-cavity magnum core mould -------------------- 198.00 Sizes: .312, .340, .365, .390, .430, .489 diam. * PCS-1 --------- Precision core cutter, choose size: ----------- 69.50 Sizes: .126, 185, 218, 247, 247, 312, 340, 365 * PCS-1D -------- Spare inserts for PCS-1, per pair --------------- 8.00 * PCS-2 --------- Magnum core cutter ----------------------------- 98.00 Sizes: .247, 312, 340, 365, 390, 430 * PCS-2D -------- Additional standard inserts for PCS-2 ---------- 20.00 * PCS-2DC ------- Custom size inserts for PCS-2, per pair -------- 45.00 * LW-10S -------- Pure Lead Wire, 70,000 gr. .100-diameter ------- 65.00 * LW-10 --------- Pure Lead Wire, 70,000 gr. spools -------------- 35.00 Sizes: .125, .170, .185, .218, .247, .275, .312, .340, .365, .390, .430 * LW-40 --------- Carton of 4 spools, same diameter, save 10% --- 126.00 * LW-40S -------- Carton of 4 spools .100 diam, save 10% -------- 234.00 * LED-1-H ------- Lead Wire Extruder Kit, for CHP-1 ------------- 498.00 * LED-D --------- Additional Die Insert for LED-1 ---------------- 25.00 * LED-2-S ------- Lead Wire Extruder for .14-.20, CSP-1 --------- 189.00 * LED-2-SC ------ Lead Wire Extruder for CSP-1H Hydro-Mite ------ 398.00 * BMT-1 --------- Billet Mould Tube (spare, for LED-1-H) -------- 10.00 * BMT-B --------- Billet Mould Tube support base (spare) --------- 25.00 Cannelure and knurling tools: * HCT-1 --------- Hand Cannelure Tool (22-72 jacketed) --------- $129.00 * HCT-1W -------- Spare .05" wide std. cannelure wheel ----------- 25.00 * HCT-2 --------- Lead Bullet Knurling Tool (22-72 cal) --------- 129.00 * HCT-2W -------- Spare Bullet Knurling wheel -------------------- 25.00 * HCT-3 --------- Lead Bullet 2-Groove Tool (22-72 cal) --------- 129.00 * HCT-3W -------- Spare 2-Groove wheel --------------------------- 25.00 * HCT-WC -------- Custom wheels, to your drawing/specs ----------- T&M * PCM-2 --------- Power Cannelure Machine w/wheel --------------- 699.00 * PCM-W --------- Additional standard cannelure or knurling wheel- 75.00 * PCM-WC -------- Custom wheel, made to your drawing/specs ------ 145.00 * PCM-S --------- Height spacer kit, .025 & .048" (5-pcs) -------- 10.00 * PCM-P --------- Back plate for PCM-1 (spare) ------------------- 95.00 * PCM-PC -------- Custom Machined Back plate for PCM-1------------ T&M * PCM-F --------- Carousel support, send sample bullets --------- 298.00 * PCM-FC -------- Cartridge/Case Feeding Guide, machined -------- 349.00 Specialty items: * PT-50-H ------- 50 BMG Priming tool for CSP-2, CHP-1 ---------- 198.50 * SH-50-H ------- 50 BMG Hardened steel shell holder, 7/8-14 ----- 69.50 * PT-50SH ------- 50 BMG Priming Pocket Swage --------------------198.50 * SH-50SH ------- 50 BMG Shell holder for primer pocket swage ---- 69.50 * BPK-1 --------- Bullet Polisher Kit, 115v. --------------------- 69.50 * WS-1 ---------- Walnut Shell Media, 1-lb. ----------------------- 3.00 * WS-10 --------- Walnut Shell Media, 10-lb ---------------------- 27.00 * SPUD-1 -------- Case polishing tool, spin cases in drill ------- 39.50 * SAW-1 --------- Tubing cutter saw, 0-3 inch lengths 115v 60Hz-- 489.50 * SAW-2 --------- Tubing cutter saw, infinite lengths 115v 60hz-- 589.50 * SAW-B --------- Spare copper-cutting blade for SAW-1 ----------- 29.50 * SAW-BB -------- Blade bolt, SAW-1 and SAW-2, LH-thread hardened-- 8.00 * SAWBELT1 ------ Motor drive belt, SAW-1 and SAW-2 -------------- 10.00 * SAWBELT2 ------ Spindle drive belt, SAW-2 ---------------------- 10.00 * SAWSPIN1 ------ Blade spindle assembly, SAW-1 and SAW-2 -------- 89.50 * SAWSPIN2 ------ Offset shaft assembly, SAW-2 ------------------- 89.50 * HTO-2 --------- Heat Treatment Oven, 115v. electronic -------- 1650.00 * HTC-1 --------- Heat Treatment Compound, coating --------------- 45.00 * BL-1 ---------- Ceramic Heat Treatment Block, for bonding cores- 12.00 * BL-KIT -------- Set of two BL-1's, template and instructuctions- 22.50 * BL-10 --------- Carton of 10 Ceramic HT Blocks, 60-lbs --------- 99.50 * Note: Core bonding and heat treating of jackets can be done quickly * with a propane torch and the above kit. Ceramic blocks are easily cut * and driled with wood-working tools, withstand 2600-deg.F. Reloading Press Dies: * BSD-224R ------ 2-die set (PF, CS), .224 cal 6-S ogive -------- 447.00 * BSD-243R ------ 2-die set (PF, CS), 6mm 6-S ogive ------------- 447.00 Consists of the first two of these dies: * PF-1-R -------- Point Forming Die ----------------------------- 249.00 * CS-1-R -------- Core Seating Die ------------------------------ 198.00 * LT-1-R -------- Lead Tip Shaping Die -------------------------- 198.00 * CSW-1-R ------- Core Swage Die, .224 -------------------------- 198.00 * PUNCH-R ------- Standard punch, specify purpose ---------------- 50.00 * KIT-224R ------ Make free .224 bullets from fired .22 cases --- 783.00 * KIT-243R ------ Same as above but with 6mm dies --------------- 783.00 * Note: kit consists of core seat and point form dies, jacket maker die, * 4-cavity core mould, swage lube, and handbook of swaging. Lead wire * and core cutter may be substituted for core mould if desired. * PRO-1-R ------- Calibers .251 to .58, Soft lead only ---------- 249.00 * PRO-PUN ------- Pro-Swage Punch, standard 1-E, 3/4-E, Keith --- 50.00 * PRO-PUNC ------ Pro-Swage Punch, custom or weight adjusting --- 120.00 * PRO-KIT ------- Pro-Swage Kit: die, lead, cutter, lube, book--- 361.50 * BGK-1-R ------- Base Guard Kit. (make your own BGs) ---------- 229.00 * RFJM-22R ------ Rimfire Jacket-Maker, FREE .224 jackets. ------ 179.00 * RFJM-6MR ------ Rimfire jacket-Maker for 243 caliber ---------- 179.00 * RFJM-ROD ------ Replacement screw-in rod for 224 jacket maker --- 6.00 * PUNCH-R ------- Specify .224 or 6mm RFJM (spare) --------------- 50.00 * SPJM-25R ------ Shotgun Primer Jacket-Maker ------------------- 179.00 * JRD-1-R ------- Jacket Reducing Die (.035" max) --------------- 179.00 * BRD-1-R ------- Bullet Reducing Die (.006" max) --------------- 179.00 * BRD-1-RC ------ Bullet Reducing Die w/RBT Punch --------------- 219.00 * ET-2-R -------- Jacket trimming die, specify caliber ---------- 249.00 * LOCKRING ------ Die Loc(tm) quick-locking 7/8-14 (tool free) ---- 8.00 All prices are for regular work on tools with standard specifications. Delivery can range from immediate to as long as a year, depending on the backlog, and similar pending items in the queue (grouped for faster delivery rather than waiting as each comes to the top of the list). Delivery on items not on the shelf at the time of the order cannot be predicted or estimated, other than as stated here. If delivery is more critical than price, rush overtime basis (first available weekend after expediting the order) at 2 X listed price may be requested for delivery within 30 days. Prices are subject to change without prior notice. Returns and cancellations are subject to 15% restocking or completed labor fee. Special Projects & Custom Work.............................. $80/hr. 30-day delivery, Overtime/rush jobs.....2 X standard price, $160/hr. --------------------------------------------------------------------